Listen to the Podcast:
Do you know how to fix Internet connection problems in Windows 10? Well friends, we continue with the problems that we encountered after having updated our operating system to Windows 10.
And it is that the new version of Microsoft’s operating system is plagued with errors and bugs that, by the way, it will try to repair with a large update that will see the light. Shortly. Well, having said that, it should be noted that one of the problems that many users experience after upgrading their operating system to Windows 10 is the inability to connect to the Internet through their Wi-Fi connection.
You may also be interested in: How to fix the problem: “One or more protocols are missing on this computer and the Windows Sockets registry entries required for network connectivity are missing” in Windows 10 Internet connection.
Many users report that when they try to connect to the Internet through a Wi-Fi connection, a connection status is displayed: “Limited connection”. This will prevent your computer from connecting to the Internet until the connection is successful. The problem is that no matter how many times we disconnect and reconnect to our Wi-Fi network, the status of our connection will not change. That being said, we should know that Windows
If after upgrading to Windows 10 it shows UNKNOWN NETWORK, here is the solution: How to fix unknown network or limited connection in Windows 10. (WiFi or Ethernet connection).
That is why today we want to show you a series of tips and tricks to be able to solve internet connectivity problems when upgrading to Windows 10:
The first thing that we recommend before anything else is to make a restore point in our operating system so that in the event that our equipment suffers a failure we can always return to the point before the changes shown in this tutorial. To create a point, you just have to search for the Create a Restore Point tool through the search box on the Windows 10 taskbar. You can also access it from the Control Panel. This will open a window in which you must follow the steps that we indicate during the process.
Once the restore point is created, we must go to the Device Manager; For this we will have to search through the Windows search engine or by going to the Control Panel. Once the Device Manager window is open, we must go to the “Network adapters” section.
Click “Network Adapters” to display all the adapters that allow you to make a wireless connection. Among the different adapters that are shown, we must locate our wireless network card that is normally identified by including the word Wireless in its name. Double click on it to open a new window.
In this new window, you need to go to the Driver tab and click on the Update Driver button. Once updated, you need to check if you already have a good internet connection.
If your problem has not been solved, you need to go back to the device manager, in this case, right-click on your wireless network card. From the dropdown menu, you need to click on the Disable option. Confirm the changes and recheck your connectivity to the Wi-Fi network.
If this still doesn’t work, you’ll need to re-enable the wireless network card disabled in the previous step. You will now need to access the command prompt with administrator rights. You can do this from the Windows 10 search by right-clicking on the search result and selecting the Run as administrator option.
In the command prompt window, we must enter the following commands, do not forget to press the Enter key after each of the commands:
Domain:
- netsh int tcp set heuristics disabled
- netsh int tcp set global autotuning level = disabled
- netsh int tcp global set rss=enabled
- netsh int tcp show global
Finally, you must restart your computer for the changes to take effect. Once restarted, you should check the internet connection again.
Read more: Razer Blade 15 2018 H2
If the network (WFI) icon is not showing on the taskbar: How to solve the Wi-Fi icon is missing in Windows 10 and be able to connect to the Internet?
Go to the Device Manager tool. When the window of said tool is open, we must go to the Network adapters section. Once you show this section, you must right click on your Web adapter, in the case of the photo: Dell Wireless 1703 802.11b/g/n (2.4GHz)
From the drop-down menu, you must select the properties option, which will cause the opening of a new window in which we will have to click on the Power Management tab. It will be here where you will find the option: Allow the computer to turn off this device to save energy.
Uncheck the box for that option and click the OK button. Right after that, proceed to restart your computer to check if you now have an Internet connection via Wi-Fi.
Also Read: How To Get Twitch On Samsung TV
The problem may be the router you are connecting to. In this case, we need to check if the router is broadcasting the SSID. To find out if your router is doing this transmission, you should check it as follows:
Type 192.168.1.1 in the address bar of your browser; the address will connect to your router. Here you may need to login with your admin credentials. Once inside, you should look for the Settings/wireless configuration section. Check if the SSID is displayed here and if the “Broadcast SSID” box is checked. You should keep in mind that this can vary a bit depending on the manufacturer of the router.
Another solution you can change the name of the SSID and click save for the changes to take place and make sure the SSID is visible in the list of networks that is displayed when we click the network icon in the Windows 10 system tray
Note: Sometimes power cycling the router can fix the problem. To do this, you will only have to press the power button of the router to immediately disconnect the power cable from the router. Leave it for a few seconds, plug the power cable back in and press the Power button again. After this verification, if the WiFi connection is now visible and ready to connect to the Internet.
Also Read: How To Fix Bluetooth Problems In Windows 11
The problem with the Internet connection can be caused by previous or current use of a VPN program or service. In this case, you will have to remove the VPN service through the Registry Editor in Windows 10. To do this, we will have to perform the following steps:
Use the keyboard shortcut: Windows Key + R to open the Run Here dialog, enter the CMD command and press the Enter key to launch Command Prompt. In this window, we must enter the following command:
record delete HKCR\CLSID\{988248f3-a1ad-49bf-9170-676cbbc36ba3} /va /f
Once you’ve entered the command and hit the Enter key to execute it, for the next line, let’s enter this new command:
netcfg -v -u dni_dne
After pressing the Enter key to execute it, we must restart our computer to later check if our Windows 10 operating system is already capable of connecting to the internet through our Wi-Fi network.
Bonus method 4:
Finally, maybe the final solution is to use the official Microsoft tool to fix network problems in Windows 10. This tool is included in Windows to fix network problems, check what is causing the problem and fix it automatically. To access the Windows network troubleshooter, you must type the following term in the Windows search field: Identify and repair network problems.
When the tool is displayed among the search results, we must click on it. This will allow you to scan for errors to automatically find and fix them.
Hopefully, after this article update, you will finally be able to fix this Wi-Fi connectivity issue on Windows 10 operating system.
New solution. (courtesy of our reader Eduardo Alvarez)
The first thing will be to connect to the Wi-Fi network and then access the device manager. It will be then when we have to look for the Network Adapters.
This will reveal the list of network cards installed in your computer, that is, the Ethernet and wireless cards. It will be in the Wireless Adapter where we will have to double click so that, in this way, a window is displayed in which we will have to click on the Advanced Options tab.
In this tab you will find the option: Roaming aggressiveness. This will reveal a configurable field in which we must set the Highest option.
Finally, you just have to click accept to save the changes. Now your computer will disconnect from your Wi-Fi network to do it again in a more persistent and aggressive way. This setting will now allow all connections you try to connect to; your wireless network card will force the connection to the max.
Also Read More: How To Turn On Bluetooth In Windows 10
How To Fix WiFi Connected But No Internet Connection (Advanced Solutions)
Since some of you may be experiencing Wi-Fi connection but no internet connection issue, we will continue to provide some advanced techniques to help you resolve this issue below. If you can access the Internet on other devices but not on your PC, you can try some of these solutions.
Temporarily disable antivirus software
You can try to temporarily disable or uninstall any third-party antivirus software to test if the WiFi is connected, but there is no way to fix the internet problem. Antivirus software can occasionally interfere with certain functions on your computer.
Troubleshoot your device’s internet connection
You can click Start -> Settings -> Update & security -> Troubleshoot. Click Internet Connections and click the Run the troubleshooter button. Windows will automatically find and repair any detected problems with your Internet connection or websites.
Update network adapter drivers
- You can click Start, type device manager and choose Device Manager to open it.
- Expand Network Adapters, right-click your network device, and choose Update Driver.
Then you can check if your Windows 10 PC can connect to the Internet.
This tutorial contains 11 fixes to help you fix internet issues; Hopefully your internet connection problems like no internet connection, Wi-Fi connected but no internet Windows 10, router not connecting to internet, internet connected but not working etc. now they can be solved. If you have better solutions for internet connection problems, please share them with us.
Subscribe to our latest newsletter
To read our exclusive content, sign up now. $5/month, $50/year
Categories: HOW TO
Source: tit.edu.vn